Controlled output size
The product page ties final particle size to interchangeable screen mesh, which matters when material must feed a later granulating, sorting or recovery step.
Industrial recycling guide
Single Shaft Shredder Selection for Recycling Lines
For buyers comparing a single shaft shredder with a Multi-shaft shredder, SOYU's SR Series gives a practical starting point: hydraulic feeding, high-torque rotary cutting, screen-controlled output size and material coverage across plastics, wood, paper, cables and mixed waste.
40-100mmStandard screen hole range
PLC controlIntelligent electric control system
CE / ISOListed by the product page
What the product page confirms
The SR Series is described as a high-performance single-shaft shredder for precision size reduction. The page lists a hydraulic-driven pusher, high-torque rotor, four-way reversible alloy steel knives and a quick-change screen system.
Specification snapshot for shredder buyers
| Product family | SR Series Single-Shaft Shredder |
|---|---|
| Primary role | Precision size reduction for bulky waste and recyclable materials. |
| Feeding system | Hydraulic-driven pusher feeding material toward the rotary shaft. |
| Cutting system | High-torque rotor with four-way reversible alloy steel knives. |
| Output control | Quick-change/interchangeable screen mesh; standard hole sizes from 40 to 100mm. |
| Material scope | Plastics, wood, paper, waste cables, MSW/RDF, e-waste, metal recovery and reinforced composites are named on the page. |
| Quality signals | The page lists CE Certified, ISO 9001 System, intelligent PLC control and precision shredding. |
Selection logic
Where a single-shaft path makes sense
The SR Series direction is strongest when the buyer needs controlled particle sizing, a pusher-fed process and screen mesh choices for downstream recycling rather than only rough tearing.
Bulky material feeding
A hydraulic pusher and rotary shaft setup helps explain why the page positions the machine for bulky plastics, wood, paper and cable waste.
Recycling-line planning
The page calls the SR Series an ideal primary shredder for advanced recycling lines, so the RFQ should include downstream process requirements.
Shredder type guide
Compare related shredder options before sizing the line
These related pages help the buyer compare single-shaft, twin-shaft, four-shaft and heavy-duty single-shaft choices without turning the page into a product directory.
SR Single Shaft
Best starting point for screen-controlled output and broad material coverage.
Open product
Twin Shaft Shredder
Useful comparison path for high-torque double-shaft industrial shredding.
Open product
Four Shaft Shredder
Alternative when the selection question moves toward multi-stage cutting.
Open product
Heavy Duty Single Shaft
A nearby single-shaft page for heavier-duty sizing discussions.
Open productRFQ inputs
What to send before asking for a quote
A useful RFQ should describe the material stream and output target, because the page connects screen mesh, knife configuration and downstream processing to final particle size.
Material stream
List plastics, wood, paper, cable, MSW/RDF, e-waste, composites or other materials, including contamination or mixed-feed concerns.
Output target
State expected particle size, downstream sorting or recovery process, and whether the 40-100mm standard screen range is a starting point.
Operation context
Share throughput expectations, maintenance access, safety needs and whether a single, twin or four-shaft path is also being considered.
Related reading
Two guides for shredder selection
These guides help buyers connect waste-management goals with the choice between single-shaft and multi-shaft shredding.
Why Single Shaft Shredders Are Essential for Efficient Waste Management
Explains why single-shaft shredders support recycling processes, cost control and large-scale waste reduction.
Read article
Single Shaft Shredders vs. Multi-Shaft Shredders: Which is Right for Your Needs?
Compares single-shaft and multi-shaft choices by material, throughput and operational needs.
Read articleFAQ
Six questions buyers usually ask before sizing a shredder
What is the SR Series single-shaft shredder designed for?
The product page describes the SR Series as a machine for precision size reduction of plastics, wood, paper and waste cables.
Which feeding and cutting features are listed?
The page mentions a hydraulic-driven pusher, a high-torque rotor, four-way reversible alloy steel knives and a quick-change screening system.
How is final particle size controlled?
The product description says final particle size is controlled by interchangeable screen mesh, with standard hole sizes from 40 to 100mm.
Which material applications are shown?
The page lists plastics, MSW to RDF, cable and metal recovery, e-waste, biomass and wood, paper and cardboard, plus reinforced composites.
When should buyers compare multi-shaft options?
The comparison guide explains that single-shaft and multi-shaft shredders serve different tasks, so buyers should compare material type, throughput and operating needs.
Where should a buyer request sizing help?
Use the product quote path or SOYU contact page with material type, expected output size, throughput target and downstream process requirements.
Next step
Prepare the material stream before selecting the shredder family
Start with the SR Series page, compare nearby shaft configurations, then contact SOYU with feed material, output size and downstream recycling requirements.
